Three-Beam And Four-column Hydraulic Press

Three-Beam And Four-column Hydraulic Press
Three-Beam And Four-column Hydraulic Press

The three-beam and four-column hydraulic press is mainly suitable for metal material drawing, blanking, bending, flanging, cold extrusion and other stamping process and more positive, pressing, powder products and abrasive products pressing molding and plastic products, insulation materials pressing molding.


1. The four-column hydraulic press is suitable for the stamping and drawing forming process of metal sheet parts, which is mainly used in the forming process of metal covering parts in automobile and home appliance industries


2. Three-beam and four-column hydraulic press (extension hydraulic press) can be used for pressure forming of metal mechanical parts, mainly including die forming, extrusion forming of metal profiles, cold and hot die forging, free forging and other processing technologies


3. Three-beam and four-column hydraulic press can be applied to powder products industry, such as magnetic materials, powder metallurgy, etc


4. Three-beam and four-column hydraulic press can be used for pressing and forming of non-metallic materials, such as SMC molding, hot pressing molding of automobile interior trim, rubber products, etc


5. Three-beam and four-column hydraulic press can be used for hot pressing of wood products, such as plant fiber plate, profile hot pressing processing


6. The four-column hydraulic press can be used for other pressing, calibration, plastic sealing, printing and other processes, automobile pipe, plate internal high-pressure molding and plate liquid filling forming


Note: The working pressure, effective stroke, working height and running speed of four-column press can be customized according to customers' requirements!


三梁四柱液压机(图2)

三梁四柱液压机(图3)

1. The power control system and electric control system of the three-beam and four-column hydraulic press are independent, and centralized control is adopted by pushing buttons.

The electric control system of this 1000-ton three-beam four-column hydraulic press USES Omron PLC programmable controller from Japan and is optional.

Adjustment, manual and semi-automatic operation can be realized through the transfer switch.

Ejector travel and sliders are also controlled by the transfer switch.


2. The equipment of three-beam and four-column hydraulic press can be customized according to the specific needs of customers and the production process to adjust the hydraulic press pressure, speed memory slider stroke, etc.

This three-beam and four-column hydraulic press can perfectly complete the ejecting process, without ejecting process and drawing process. Each process can also be divided into two options: constant pressure and fixed range.


3. The body of the three-beam and four-column hydraulic press is a simple and economical three-beam and four-column structure, and the structural analysis and optimization design of the finite element can ensure the uniform force under the condition of large table, the slider is guided by the column cylinder, and the guide sleeve is easy to maintain.


4. The hydraulic control system of the three-beam and four-column hydraulic press is a two-way plug valve integrated system. Ycy14-1b constant power axial piston pump is used for the main oil pump, and CB-B gear pump is used as the cooling and filtering equipment.

The main cylinder of this three-beam and four-column hydraulic press sliding block USES piston type cylinder, and the original imported U-shaped sealing ring seals the cylinder.