What should I do if the opening of the shear machine is inconsistent? Solve all problems in 7 steps

Release Time : 2020-11-09  View Count :

What should I do if the opening of the shears is inconsistent? Don't worry, Mingcheng provides you with a solution to the inconsistent opening of the shearing machine.


如何使用QC12Y液压剪板机?简单三步,让剪板机使用寿命翻倍!铭诚机电(图1)

1. Turn on the power of the hydraulic shears, lubricate and maintain all parts of the shears, and let the machine run idling for 1 minute to ensure normal operation.


2. Observe the machine while idling. If there is noise when the shearing machine is cutting, please stop cutting and check.


3. According to the production license, the shear blade will try to cut thin to thick thin slices and be familiar with the performance of the shearing machine.


4. Cutting steel plates of different thickness requires reasonable adjustment of different blade gaps. Unreasonable blade clearance may damage the shear blades or fail to cut the required board size during the cutting process.

5. Reasonable shear blade-the gap between the upper and lower blades should be 1/10 to 1/20 of the steel plate to be cut, and the sharpness of the shear blade should be considered.

 如何使用QC12Y液压剪板机?简单三步,让剪板机使用寿命翻倍!铭诚机电(图1)

6. Open and check the pressure gauge during the operation of the shearing machine, and check the oil pressure value. When cutting 12mm steel plate, the pressure value should be less than 20. This requirement must be observed during work. The pressure cannot be increased arbitrarily, causing damage to the shearing machine.


7. When working in summer, pay special attention to the temperature of the oil tank of the scissors exceeding 60°, and cool down or shut down and rest in time.

 如何使用QC12Y液压剪板机?简单三步,让剪板机使用寿命翻倍!铭诚机电(图3)

Dalian Mingcheng Electromechanical Equipment Co., Ltd. was established in 2012. It is an enterprise specializing in the development and sales of CNC machine tools and automatic welding equipment. Our main products are plate shears, bending machines, plate bending machines, combined punching and shearing machines, presses, hydraulic presses, laser cutting machines, capping machines, welding equipment, polishing equipment and so on. Precautions for gauge accuracy after adjustment of QC12Y hydraulic pendulum shears (Picture 2) Service hotline: 0086-13322202758


1-201109134559239.png


At present, the portable plasma cutting machine is active, with affordable price, fast delivery speed, high cost performance, and a variety of colors and styles to choose from. If you are interested, please consult us directly.