Adjustment of wire foot distance of bending machine

Release Time : 2021-01-14  View Count :

The bending machine is a machine that can bend thin plates. Its structure mainly includes a bracket, a working table and a clamping plate. The working table is placed on the bracket. The working table is composed of a base and a pressing plate. The base is connected with a hinge and a clamping plate. Connected, the base is composed of a seat shell, a coil and a cover plate, the coil is placed in the recess of the seat shell, and the top of the recess is covered with a cover plate. Next, the editor will introduce you to the adjustment of the wire distance of the bending machine, I hope it will help you!

Adjustment of wire foot distance of bending machine(图1)

1. Loosen the upper and lower forming knife pressing plates, adjust the screw, adjust the upper forming knife to the required distance, and put on the pressing plate;

2. Adjust the Helicobacter so that the upper and lower forming knives reach the required gap;

3. After adjustment, the lower forming knives should be kept parallel to each other;

4. Adjust the hand wheel 39 to make the forming stitches have the same height. The upward wire feeding distance becomes shorter, otherwise the wire feeding distance becomes longer.